Different methods of cutting ceramic tiles

If there was only one type of tool for cutting tiles, then life could be very easy however they are so many and each is suitable for cutting different types of tiles e.g. mosaic, glass or porcelain. Before you can buy any tool, it is very important to understand your requirements.

In this article, am going to guide you on cutting ceramic tiles to fill shapes that look awkward when tiling your kitchen or bathroom floor. Before you complete reading this article, you will have learnt how to use various types of power tools suitable for ceramic tile cutting.

6 ways of cutting ceramic tiles

To make the process of cutting ceramic tiles easy, there are different tools that are recommended. Below are six tools that you can use.

1.Manual snapper cutter

The only tools that can be used to cut ceramic tiles are either a wet tile saw or a snap cutter. Wet tiles can be bit expensive however if you are low on budget you can buy snap cutter because it is less expensive.

Another name for snapper cutter is rail cutter and works in a similar way just like glasscutter. The snapper has a carbide wheel that is pressed along a tile slowly to score it.

This is not the right tool if you want to make straight cuts you have to purchase a wet tile saw.

2.Tile nipper

If you want to make irregular cuts along the edges of a tile and not straight cut, using tile nipper is more efficient than snap cutters because they are not capable of making irregular cuts.

Tile nippers are also known as nibbling tools and they are used to make half-inch cuts by first making a scoreline. One good thing about nippers is that they are cheap and their price range from $10-$25 depending on their quality.

Some of the tile nipper drawbacks is that the cuts they make are not clean unlike when using other tools.

3. Wet tile saw

In order to cut many tiles and make accurate cuts, you need to purchase a wet saw however; you have to be very experienced in order to be able to use one. There are different models and sizes of wet saws. If you cannot afford to buy one you can always rent out.

Most popular and widely used wet saws are priced between 200 and 500 dollars. If you are looking to buy one you should read out this comparison of Dwe7491rs Vs Bosch 4100-10 because they are best in the market. Find which one is suitable for your needs.

4. Glass cutter

Glasscutter can be used to complete tasks that do not require curvy or complex cutting. You can buy a glasscutter in any nearby local store or even online on sites like Amazon at an affordable price.

5. Angle Grinder

An angle grinder is a 4-inch tool that has a stone blade. It can be useful when making angle cuts. Even though the cuts cannot be accurate and cleaner like those made using a wet tile saw, it is a cheaper way of cutting tiles.

6. Rotary cutting tool

Above mentioned tools cannot be used to make a hole or cut on the edges of a tile however, you can use a rotary cutting tool.

Rotary cutting tools can be very useful when you want to make circles on a tile where you will insert the pipe. The tool has a blade that works just like a drill.

Conclusion

Cutting ceramic tiles can be a very hard task if you do not have the right tools to use. It is very important to understand different ways of cutting tiles so that you can be able to choose the right one that you can also afford.

Leave a Reply

Your email address will not be published. Required fields are marked *